Clippasafe 118/1 Extendable, Dual Fix Push to Lock Gate Manual do Utilizador descarregar pdf (Página 9)

89 mm

756 mm

88 mm

755 mm

5. Mark the positions for the hinges ‘J’ on the wall surface you want the gate to hinge from.

The top hole for the lower hinge should be 88mm from the floor. The top hole for the upper

hinge should be 755mm from the floor. On the opposite wall surface mark the positions for the

wall cups ‘C’. The top hole for the lower wall cup should be 89mm from the floor and the top

hole for the upper wall cup should be 756mm from the floor.

3. Insert the 2 hinge bars ‘I’ with 2 nuts ‘E’ into the holes provided on one side of the gate.

Then insert 2 spindles ‘D’ with 2 nuts ‘E’ into the holes provided on the other side of the gate.

Make sure that both hinge bars and spindles are all inserted the same distance into the gate.

2 2

4. Attach the pedal ‘F’ to the centre of the gate using the two screws ‘G’ provided. Use the

correct holes, depending on the width of the opening,

as in Step 1.

1 2

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Clippasafe 118/1 Extendable, Dual Fix Push to Lock Gate Manual do Utilizador Página 9